Add or Edit an Asbestos Survey

To add a new request:

1. Navigate to Health and Safety > Asbestos > New Asbestos Survey.

   The Asbestos Survey Editor tab is displayed.

   

2. Select the Survey Details tab. Enter details of the request.

The fields on the Survey Details tab are described in the following table.

This field	Holds this information...
Title	The title of the survey. This field is mandatory.
Manage Locations	The relevant locations. Business units and Physical locations fields are enabled when the asbestos survey is saved.
Surveyor	The surveyor assigned to the task. This field is mandatory.
Type	The type of inspection. Select from the drop-down list. This field is mandatory. Note: These can be defined in Survey Type reference data (accessed by navigating to Health and Safety > Asbestos > Asbestos).
Method	The method of inspection. Select from the drop-down list. Note: These can be defined in Survey Method reference data (accessed by navigating to Health and Safety > Asbestos > Asbestos).
Method Variation	The description of any relevant variations to the survey method.
Objective	The objective of the survey.
Comments	Relevant comments about the survey.
Forecast Survey Date	The estimated date of the survey.
Actual Survey Date	The date that the survey was performed.
Survey From Date	The date that the survey began.
Survey To Date	The date that the survey finished.
Approved	Whether the survey is approved.
Approved By	The identity of the survey approver.

3. Select the Additional Location info tab. Enter details of the request.

   The Additional Location info tab is displayed where you can manage the locations where the survey has been carried out, which will become enabled once the form has been saved.

   

The fields on the Additional Location info tab are described in the following table.

This field	Holds this information...
Description of areas included in the survey	The description of the areas that are included in the survey.
Description of any areas excluded in the survey	The description of the areas that are excluded from the survey.
Agreed exclusions and inaccessible areas	The agreed exclusions and areas that are inaccessible the survey.

4. Select the Surveying Parties tab. Enter details of the request.

   The Surveying Parties tab is displayed where you can select the survey commissioner and surveyor.

   

The fields on the Surveying Parties tab are described in the following table.

This field	Holds this information...
Survey Commissioned by	The identity of the survey requester. Select from the drop-down list. Note: These can be defined in Surveying Commissioners reference data (accessed by navigating to Health and Safety > Asbestos > Asbestos).
Survey carried out by	The identity of the surveyor. Select from the drop-down list. Note: These can be defined in Surveying Agencies reference data (accessed by navigating to Health and Safety > Asbestos > Asbestos).

5. Click Save.

   The Survey Locations tab is displayed.

   

6. Click the New button to add a survey location.

   The Select location window is displayed.

   

7. Use the level selector to select the relevant room, floor, zone, building, site, or business unit.

   The selected locations and child locations are listed in the Survey Locations grid.

   

   Note: The Surveyed column displays the survey status. A black/blue box indicates that the location has not been surveyed, a tick indicates that the location has been surveyed.

8. Click the relevant row to change the survey status.

   The Survey Location window is displayed.

   

The fields on the Survey Location window are described in the following table.

This field	Holds this information...
Location	The relevant location.
Survey Status	The survey status.
Comment	The description of the survey location.

9. Click Ok.

When you create a new Asbestos Survey, the following buttons are added to the Tasks panel:

• Manage Reference Data
• Manage Attribute Definitions

Back to top

To edit an Asbestos Survey:

1. Select Asbestos Survey from the drop-down list adjacent to the search bar.

   

2. Enter search text, the request number. click the Search button.

   

3. Results are displayed in the search results panel. Double-click the relevant record to open it.

   

   If you want to adjust the number for fields displayed, click the Field button to open the Field Chooser window.

   

   Select or de-select the fields as appropriate.

   

4. Select Click to edit details to open the request.

   

   The Asbestos Survey Editor tab is displayed.

5. Update the relevant details.

   

6. Click Save.

   

Back to top